Digital Print Finishing

700i Pro

  • Turns pre-collated sets into finished booklets
  • Performs saddle, side, and corner-stitching
  • Processes small to letter landscape booklets
  • Sheet feeding and booklet making for high productions
  • Creates 4-stitch booklets using 2 stitch heads

ALM3230 Automatic Laminator

  • One-touch operation for virtually labor free lamination
  • Laminate, trim, cut and stack up to 13″x 19″ documents all in a single pass
  • Small foot print – less than 4 sq. ft.
  • Sits on a tabletop or optional stand with rollers

Atlas C300 High-Speed Automatic Creaser/Folder

  • Crease & fold in a single pass
  • Up to 6,000 sheets per hour
  • Bottom-suction air feed table
  • Sheets up to 27.5" x 15.1"
  • Floating knife folding technology

C375 Plus

  • The creasing pressure is adjusted by the touch screen according to the weight of the substrate, without manual intervention. Crease bars are easily interchangeable in seconds. It is possible to handle substrates up to 400 gsm.
  • All the necessary information is easily programmed by user friendly touch screen.
  • A small and ergonomic control panel offers all the needed functions for production.
  • High operational reliability in production is guaranteed by professional ultrasonic double sheet testing.

CF375

  • The creasing device features the exclusive Multigraf Swingbar system to eliminate paper breakage. The paper passes without stopping during the creasing process.
  • The TOUCHLINE CF375 folding device is equipped with the patented Multigraf Pro-Knife system. It not only achieves a perfect fold but avoids marks on the sheets.
  • A small and ergonomic control panel offers all the needed functions for production.
  • High operational safety in production is guaranteed by professional ultrasonic double sheet detection.

CP375 Mono / Duo

  • Longitudinal Sequential Perforation: The CP375 combines longitudinal sequential perforation and creasing. At the heart of this new model is a patented tool changing system.
  • Line Folding: The longitudinal sequential perforation is one of the main features of the new Touchline CP375 and with interchangeable tools.
  • Speed ​​of Execution: On the CP375, document downtime is compensated by software development, which synchronizes the descent of the tool with the deceleration of the paper and thus maintains the speed of execution.
  • Guiding System: the lateral guiding unit allows precise feeding of the sheets. Simple one-handed operation.

CPC375 XPRO

  • Cutting, slitting, perforating and creasing in one pass!
  • Time perforation in both directions
  • Length and cross perforations
  • Up & down creasing
  • Barcode reader

DC In-Line Folder

  • Knife folder option for DC-618 Slitter/Cutter/Creaser
  • Performs single, double, letter, Z, and gate folds
  • Processes multiple-up jobs from start-to-finish
  • Eliminates the need for a separate folding device
  • Automated job set up and changeovers

DC-618

  • Removes margins/gutters and prevents toner cracking
  • Creates custom T- and L-shape perforations
  • Eliminates touchpoints and streamlines workflow
  • Automated job set up and changeovers
  • Crease width tool to process thicker stock

DC-646 Slitter/Cutter/Creaser

  • Removes margins/gutters and prevents toner cracking
  • Creates custom T- and L-shape perforations and can fold in-line
  • Eliminates touchpoints and streamlines workflow
  • Automated job set up and changeovers
  • Lightweight paper crease module to process thinner stock

DC-648

  • Removes margins/gutters and prevents toner cracking.
  • Creates custom T- and L-shape perforations.
  • Eliminates touchpoints and streamlines workflow.
  • Automated job set up and changeovers.
  • Camera sensor rapidly scans barcodes, registration marks, and shrinkage marks.

Duplo DC-516

  • Prevents toner cracking
  • Performs up and down creases
  • Can also cut and perforate
  • Easy job set up and changeover
  • 14″ feed capacity for longer runs

Duplo DC-516 Pro

  • Removes margins and gutters
  • Performs up and down creases
  • Creates custom T- and L-shape perforations
  • Easy job set up and changeover
  • 14" feed capacity for longer runs


RF1430

  • Media Width 5" – 14"
  • Up to 30 ft/min
  • Max Frame Length 36"
  • Input and Output roll diameter of 14"

RF510

  • Maximum Cutting Width 5"
  • Maximum Label Length of 14"
  • 10 ft/min Cutting Speed
  • Membrane Keypad
  • Single Point Registration

RF8510

  • Media Width of 4" - 8.5"
  • Maximum Label Length of 14"
  • 10 ft/min Cutting Speed
  • Touch Panel Operation
  • Single Point Registration

RF8520

  • Maximum Cutting Width 8.5"
  • Maximum Label Length of 22"
  • 20 ft/min Cutting Speed
  • Touch Panel Controls
  • Single Point Registration

TCF375

  • TCF375 module allows online creasing and folding of documents that have already undergone selective perforation in both directions or creasing on the CP375.
  • Upper and lower output.
  • Many applications are possible in a single operation.
  • Time saving, automation and above all unique applications in just one pass!

150 Booklet System

  • Turns flat sheets into finished booklets
  • Performs saddle, side, and corner-stapling
  • Processes CD to letter-size booklets
  • Automated job set up and changeovers
  • 10-bin feeding per tower with dual fan technology

150 Digital Booklet System

  • Turns flat sheets into finished booklets
  • Performs saddle, side, and corner-stapling
  • Processes CD to letter-size booklets
  • Automated job set up and changeovers
  • Two air suction bins with built-in end mark reader

AEROCUT X PRO

  • Slitter
  • Cutter
  • Creaser
  • Perforator
  • Cross perforator
  • Jump perforator

ALM3222 Automatic Laminator

  • One-touch operation for virtually labor free lamination
  • Laminate, trim, cut and stack up to 13″x 19″ documents all in a single pass
  • Heated rollers for crystal clear scratch-free lamination
  • Micro-adjustable side trimmers for precise flush cutting or exact border encapsulation
  • Handles up to 13” wide sheets (12.6” of film coverage)
  • Built in long mode operation for banner length prints

Atlas C102 High-Speed Automatic Creaser

  • Quick-release blade system
  • 7" color touchscreen
  • Up to 8,500 sheets per hour
  • Bottom-suction air feed table
  • Sheets up to 35" x 13"
  • Cross/part perforation kit (optional)

CC-330 Card Cutter

  • Removes margins and gutters
  • Finishes business cards
  • Eliminates manual cutting
  • Easy job set up via control panel
  • 7 pre-programmed jobs and 6-job memory

CL-27PR: Element 27” Professional

  • Capable of using 1.5 mil to 10 mil film
  • Laminates up to 9 ft/minute
  • Variable Temperature Control
  • Safety Shield
  • Auto shut off after 2 hours

CL-27SD: Element 27” Standard

  • Capable of using 1.5 mil to 3 mil film
  • Laminates up to 3 ft/minute (Fixed)
  • Variable Temperature Control
  • Safety Shield
  • Auto shut off after 2 hours

DBM-HSC High Speed Creaser

  • Prevents toner cracking
  • Removes white borders
  • Provides a full-bleed finish
  • Automated set up and changeovers
  • Job programming via system’s PC Controller

DFL-500 Dry Coat/Foil/Laminator

  • 3-in-1 solution
  • Easy job set up and changeover
  • Foiling with gold, silver, blue, green, red, and matte gold colors
  • Automatic film cutting system to separate laminated sheets
  • Dust removing and de-curling system featured in more expensive laminators

DKTS-200 Two Knife Trimmer

  • Removes white borders
  • Removes gutters
  • Performs offset trimming
  • Automated set up and changeovers
  • Job programming via system’s PC Controller

  • DMSF-10 Dual Mode Sheet Feeder

  • Feeds pre-collated sets
  • Eliminates inline vs offline dilemma
  • Feeds into a finishing device
  • Double feed detection
  • 19.7″ feed capacity in lower bin for offline finishing

  • DPC-2024 Digital Die Cutter

    • Cuts, kiss cuts, and scores larger formats
    • Cuts adhesive vinyl roll-to-sheet
    • Processes cut files without physical dies
    • Easy job file preparation and set up
    • Quick changeover from paper to vinyl cutting

    DPC-400 Digital Die Cutter

    • Cuts, kiss cuts, scores, and perforates
    • Handles small formats and various substrates
    • Processes cut files without physical dies
    • Integrates with Fiery JobFlow to apply registration marks and QR code
    • Triple tooling head and DPC Controller software

    DPC-600 Digital Die Cutter

    • Cuts, kiss cuts, scores, and perforates
    • Handles larger formats and thicker substrates
    • Processes cut files without physical dies
    • Easy job file preparation and set up
    • Automated registration and changeovers

    EZCreaser

    • Offers a reliable top-load friction paper feed.
    • Includes micro-laterally adjustable feed rails and a sheet counter for batch and total counting.
    • CAM actuated compression creasing.
    • Comes standard with rotary perf wheel assembly.

    Esper DM-230V Direct Mail Collator

    • Turns un-collated sheets into pre-sorted documents
    • Processes high volume, multi-sheet sets
    • Wraps each set with a cover
    • Color LCD touchscreen control panel
    • Handling of thicker and thinner stocks

    FC114ASP

    • Reliable bottom vacuum feed system with a register guide.
    • Simple programming allows you to number, crease or perforate individually.
    • Ideal for custom two- and three-part partitions.
    • Complete strike perforating assembly included, with linear perf capabilities up to 4 strike perfs per sheet-optional micro-perf and score wheel assemblies are available.
    • Includes reliable pneumatic, Gothic wheel reverse numbering heads–with 7 digits, 4 drop zeros and 4 repeats

    GOCREASE SEMI

    • Min./Max. Working Width: 4 to 18"
    • Paper Weight (Perforating): 80 - 250 gsm
    • Paper Weight (Creasing): 80 - 400 gsm
    • Channel Widths: 0.04 / 0.05 / 0.063
    • Speed: 1,500 sheets/hr.*

    LPE6510 Desktop Laminator

    • Simple to operate and easy threading  
    • Parting of the pressure rollers helps avoid flat  spots during extended downtime
    • Film frees quickly in case of a wrap-around
    • Ultra fast five minute warm-up
    • Safety shield keeps heated areas protected

    Rotatrim DigiTech+

    • A strong 1 1/4″ stainless steel guide rail provides cutting head stability.
    • A single roller mechanism results in lighter cutting action (maximum cut depth of 2mm).
    • Extruded aluminum baseboard, end frames and head – plus an aluminum square side rule – ensures extreme robustness.
    • An auto-lifting clamping mechanism locks materials into place as the head begins to cut, then automatically releases at the completion of the cut; prevents material and substrate scratching.

    Rotatrim PowerTech

    • The PowerTech frees both hands and decreases operator fatigue.
    • The trimmer is electrically driven through a steel-reinforced belt for longevity.
    • All-metal construction (and extruded aluminum baseboard, end frames and head) ensure robustness.
    • A triple roller mechanism provides extreme down force for the cutting of heavy materials (maximum cut depth of 3mm).

    Rotatrim Technical

    • A single 1 1/2″ stainless steel guide rail completely eliminates head swivel.
    • All-metal construction (and extruded aluminum baseboard, end frames and head) ensure robustness.
    • An auto-lifting clamping mechanism locks materials into place as the head begins to cut, then automatically releases at the completion of the cut; prevents material and substrate scratching.
    • A triple roller mechanism provides extreme down force for the cutting of heavy materials (maximum cut depth of 4mm).

    SPRINT 3000

    • Jogs, staples, and folds in one operation
    • Quick and easy set-up and adjustment
    • 2 stapling heads, 4 stapling positions
    • Uses 210-staple sticks
    • Powered exit conveyor

    Square IT Squareback Booklet Finisher

    • Creates square binding on stapled booklets
    • Handles booklets up to 96 pages
    • Simple, quiet operation
    • Compact and rugged with a small footprint
    • Operates as a stand-alone or in-line

    Square iT2 Squareback Booklet Finisher

    • Creates square binding on stapled booklets
    • Face, top and bottom trimming
    • Up to 50 folded and stapled sheets / 200 page booklet
    • Color touchscreen
    • Belt-feed output conveyor stacker

    TF375 PLUS High Speed Folder

    • Performs single, double parallel, letter, Z, and gate folds
    • Processes multiple-up jobs
    • Eliminates the need for separate folding device
    • Easy job set up and changeovers
    • Fold rollers adjust automatically to accommodate paper thickness

    TruCoat Mini

    • Small footprint (under 10 sq. ft.)
    • 3-mintue set-up and cleanup
    • Adjustable intensity IR for flow-out and adhesion

    UD-310 Rotary Die Cutter

    • Cuts, kiss cuts, and scores larger formats
    • Cuts adhesive vinyl roll-to-sheet
    • Processes cut files without physical dies
    • Easy job file preparation and set up
    • Quick changeover from paper to vinyl cutting

    UJ-600AS Air Jogger

    • Jogs uneven paper stacks
    • Reduces static between sheets
    • Helps reduce downtime
    • Automated job set up
    • Ionized air blower with adjustable air strength

    iCrease Pro +

    • Simple one-step hand-feed operation.
    • Crease up to 12 locations and 4 perforations per page.
    • Comes with pre-set crease locations for 11 different folds; plus 12 custom options to accommodate almost any fold.
    • Can crease and perforate in one pass–no need to manually re-feed the paper into the machine after creasing.

    iSaddle 5.0

    • Turns flat sheets into finished booklets
    • Performs heavy-duty stitching
    • Produces flatter, thicker booklets
    • Automated job set up and changeovers
    • 10-bin feeding per tower with dual fan technology

    350 Booklet System

    • Turns flat sheets into finished booklets
    • Performs saddle, side, and corner-stitching
    • Processes CD to letter-size booklets
    • Automated job set up and changeovers
    • 10-bin feeding per tower with dual fan technology

    350i Digital Booklet System

    • Turns pre-collated sets into finished booklets
    • Performs saddle, side, and corner-stitching
    • Processes CD to letter-size booklets
    • Automated job set up and changeovers
    • Two air suction bins with built-in end mark reader

    600i Booklet System

    • Turns flat sheets into finished booklets
    • Performs saddle, side, and corner-stitching
    • Processes CD-size to letter landscape booklets
    • Automated job set up and changeovers
    • 10-bin feeding per tower with dual fan technology

    600i Digital Booklet System

    • Turns pre-collated sets into finished booklets
    • Performs saddle, side, and corner-stitching
    • Processes CD-size to letter landscape booklets
    • Automated job set up and changeovers
    • Two air suction bins with built-in end mark reader


    600i PRO Digital Booklet System

    • Turns pre-collated sets into finished booklets
    • Performs saddle, side, and corner-stitching
    • Processes CD-size to letter landscape booklets
    • Automated job set up and changeovers
    • 24″ feed capacity for longer runs

    CMT 130TC

    • Trim up to 2” / 50.8 mm thick perfect-bound books
    • 10.5” Color Touch screen controller with graphical display of the system with live book location
    • Fully-automated size change in under 10 seconds with no tools required
    • Modular design – can be configured off-line, near-line, or in-line at any time

    CMT 330TC

    • Capability to trim landscape formatted books up to 12.1" (307 mm) x 12.9" (328 mm)
    • Full high-speed digital control for fast and accurate set-ups in under 6 seconds
    • Bar code system for fully automated set-up
    • Simultaneous in-line and near-line book feeding option to maximize utilization

    CP375 DUO

    • Prevents toner cracking
    • Performs up and down creases
    • Creates cross perforations
    • Easy job set up and changeover
    • High feed capacity for longer runs

    CP375 DUOTF

    • Prevents toner cracking and folds in-line
    • Performs up and down creases
    • Creates cross perforations
    • Easy job set up and changeover
    • High feed capacity for longer runs

    DC-746 Slitter/Cutter/Creaser

    • Removes margins/gutters and prevents toner cracking
    • Creates custom T- and L-shape perforations and can fold in-line
    • Eliminates touchpoints and streamlines workflow
    • Automated job set up and changeovers
    • High feed capacity and external waste bin for non-stop productivity

    DCR-ST Cross Stacker

    • Can be used with the DSC-10/60i and DSC-10/20 Collator
    • Ideal for cross or straight stacking jobs
    • Processes up to 4,000 sets per hour


    DDC-810 Raised Spot UV Coater

    • Applies spot coating, texturized, and tactile enhancements
    • Performs with precision without the use of screens or dies
    • Elevates printed applications into premium products
    • Automated job set up with hot folder technology
    • Polymers compatible with Canon, HP, Konica Minolta, Ricoh, and Xerox presses

    DSC 10/60i Paper Collator

    • Turns un-collated sheets into pre-sorted documents
    • Processes high volume, multi-sheet sets
    • Feeds into a Duplo bookletmaker or stacker
    • High resolution sensors for double feed detection
    • Automatic calibration to feed different types of paper

    DSF-2200 Sheet Feeder

  • Feeds pre-collated sets
  • Processes small to mid volume sets
  • Feeds into a Duplo bookletmaker
  • High resolution sensors for double feed detection
  • Two air suction bins with built-in end mark reader

  • DSF-6000 Sheet Feeder

    • Feeds pre-collated sets
    • Processes mid to high volume sets
    • Feeds into a Duplo bookletmaker
    • High resolution sensors for double feed detection
    • 24″ feed capacity for longer runs

    DSS-350 Square Spine

    • Adds a square spine finish for a flatter look
    • Ideal for low to mid-volume runs
    • Processes up to 2,600 booklets per hour
    • Finishes booklets up to 0.17"/4.2 mm thick
    • Can be used stand-alone to hand feed


    IFS Integrated Folding System

    • Performs single, double, letter, Z, and gate folds
    • Processes multiple-up jobs from start-to-finish
    • Eliminates the need for a separate folding device
    • Automated job set up and changeovers
    • Fold rollers adjust automatically to accommodate paper thickness

    RC-7 Round Corner Cutter

    • Ideal for rounding corners of covers, business cards, postcards, greeting cards, and photos
    • Easy operation via foot pedal or manual switch
    • 2 interchangeable dies (optional)
    • Cuts up to a 2.75" (70 mm) stack
    • Patented upper die design and micro-adjustable lower die allow for smooth and accurate cuts
    • Specially designed to cut through multiple sheets at a time with the least amount of effort
    • Interchangeable die system allows various jobs to be performed

    UD-M300 Hand Feed Die Cutter

    • Manual feed tray and foot pedal operation
    • Easy die set up and changeover
    • Cuts, kiss cuts, perforate, and creases
    • Utilizes custom-made flexible dies
    • Creates die cut pieces on a budget

    Ultra 100 PRO UV Coater

    • Applies a high gloss, satin, or matte finish
    • Enhances the richness of printed colors
    • Protects output from scratches and scuffs
    • Easy job set up via control panel
    • Infrared heating system to help cure difficult stock

    Ultra 200 PRO UV Coater

    • Applies a high gloss, satin, or matte finish
    • Enhances the richness of printed colors
    • Protects output from scratches and scuffs
    • Easy job set up via control panel
    • Infrared heating system to help cure difficult stock

    Ultra 300Ai/300A UV Coater

    • Easy job set up via control panel
    • Infrared heating system to help cure difficult stock
    • Auto gap rollers disengage between sheets to prevent flat spots
    • Automated cleaning and self-diagnostic functions