• Newly enhanced PC Controller software
• Processes up to 23 sheets per minute
• 3.9" (100mm) capacity stacker
• Handles substrates up to 400gsm
• Optional perforation modules
  

• Processes up to 30 sheets per minute
• Up to 8 slits, 30 cuts and 20 creases in a single pass
• Standard PC Controller software for easy setup and unlimited job storage
• Built-in CCD scanner reads barcodes and registration marks
• Optional Rotary Tool Module for perforating, micro-perforating, scoring, slit-scoring and strike-perforating (across the length of the sheet)
• Optional Cross Perforating Module for perforating, micro-perforating, slit-scoring, and strike-perforating (across the width of the sheet)

• 14" feed capacity and long conveyor stacker
• Cuts high volume 24-up and 36-up business cards
• Creases up to 100 sheets per minute
• Applies positive and negative creases with new dual creasing tool
• Handles paper up to 400 gsm on 14" x 26" sheet sizes
• Built-in REG mark scanner compensates for image shifts in horizontal direction
  

• Ideal for shorter runs
• Single-operator design with easy changeovers
• User-friendly touchscreen control panel
• EasyLOAD PUR glue cartridge
• Heavy-duty milling and notching
• Precision orbital PUR system

• Up to 240 business cards per minute
• Accepts wide range of paper stocks* up to 110 lb. cover/300gsm
• Accepts letter, legal, ledger, 12" x 18", and 13" x 19" documents
• Optional cassettes for finishing different applications
• 7 pre-programmed jobs & 6 programmable jobs
• Cut mark sensor for top and bottom cutting accuracy

*Works with some gloss or coated stocks - testing is required and available for free

‍

• Ideal for short run demands
• Configures up to two DSC-10/20 Collators
• Produces up to 2,400 booklets per hour
• Collates up to 7,200 sets per hour
• Reliable Isaberg Rapid stapler and staple cartridge
• 16-job memory and compact design

‍

• Produces up to 3,000 booklets per hour
• Fast and easy changeovers
• Push belt transport system prevents marks and static build up
• Programmable book spine compressor
• Automatic waste removal
• Customizable with optional small booklet, side/corner stitch, and 6-page insert kits
• Collate and stack jobs by adding the optional DCR-ST Cross Stacker

‍

• PC Controller software for easy operation
• Saddle, side, and corner stitching
• Hand-feed section via the DIB-R In-line Bridge
• Deluxe stitch heads for quality stitched booklets
• SCC (Slit/Cut/Crease) module option (350 PRO only)
• DSS-350 Square Spine option for flatter booklets

‍

• Perfect for mid-range productions
• Configures up to two DSC-10/20 Collators
• Produces up to 3,000 booklets per hour
• Collates up to 7,200 sets per hour
• Heavy-duty Deluxe 26D stitch heads
• Integrated Book Spine Compressor

‍

• Ideal for mid-production printers
• Accepts output from multiple printers
• Converts pre-collated sets into finished booklets
• Feeds larger sheet sizes up to 24" with optional Extension Tray Kit
• Belt suction feeding with front and side air separation
• Built-in ultrasonic double feed detection and anti-static device
• PC Controller software for easy job setup
• Integrated Book Spine Compressor
• Heavy-duty Deluxe 26D Stitcher Heads

‍

• Accommodates 19.1" cutting width
• Easy-to-read digital display
• Stores up to 99 programs with 9 steps each
• Full light beam curtain and dual palm cut buttons for operator safety

‍

• Accommodates 19.29" cutting width
• Hydraulic-powered, rugged construction
• Color LCD touch screen control panel
• Memory for up to 98 jobs and 49 cuts per job
• Full light beam curtain and dual palm cut buttons for operator safety

‍

• High production collating and bookletmaking
• Configures up to two DSC-10/20 Collators
• Produces up to 4,100 booklets per hour
• Collates up to 7,200 sets per hour
• Creates 30-sheet books
• Optional three-knife trimming capabilities and 2-up processing with the DKT-200 Two-Knife Trimmer

‍

• PC Controller software for easy job setup
• Intelligent multi-bin feeding (IMBF) function
• Configurable with up to 6 towers for a total of 60 bins
• Produces saddle, side, corner-stitched, and letter landscape booklets
• Optional three-knife trimming capabilities and 2-up processing with the DKT-200 Two-Knife Trimmer
• Optional stacker for collating and stacking

‍

• Ideal for mid to large volume printers
• Accepts output from multiple printers
• Converts pre-collated sets into finished booklets
• Creates saddle, side, corner-stitched booklets as well as letter landscape applications
• Feeds larger sheet sizes up to 24" with optional Extension Tray Kit
• Belt suction feeding with front and side air separation
• Built-in ultrasonic double feed detection and anti-static device
• Optional PC Controller can be added for easy set up
• Optional three-knife trimming capabilities and 2-up processing can be added with the DKT-200 Two-Knife Trimmer

• High volume sheet feeding and bookletmaking
• Feeds up to 600 sheets per minute
• 24" high capacity stacker
• User-friendly PC Controller software
• Feeds up to 14" x 24" paper using the optional DSF-CFL Cover Feeder
• Optional Barcode Kit ensures complete set integrity using 1D or 2D barcodes
• Adapters are available to adapt the DSF-6000 paper cart to the HP Indigo 5500/7000 or Xerox iGen 3/4
• Optional SCC module for in-line slitting/cutting/creasing or DKT-200 Two-Knife Trimmer can be added to produce full-bleed booklets

‍

• Accommodates 26.5" cutting width
• Hydraulic-powered, rugged construction
• Color LCD touch screen control panel
• Memory for up to 500 jobs and 79 cuts per job
• Full light beam curtain and dual palm cut buttons for operator safety

• Accommodates 31.4" cutting width
• Hydraulic-powered, rugged construction
• Color LCD touch screen control panel
• Memory for up to 500 jobs and 79 cuts per job
• Full light beam curtain and dual palm cut buttons for operator safety

• Up to 1,400 booklets per hour
• Creates more flatter, appealing booklets
• Improves pack efficiency
• For DBM-600 configurations
• Can be used as standalone
• Integrated stacker

‍

• Up to 130 business cards per minute
• Accepts wide range of paper stocks up to 110 lb. cover/300gsm
• Accepts letter or legal-sized documents
• Optional slit/perforation cassettes
• 6 preset jobs and 6 programmable memories
• Cut mark sensor for top and bottom cutting accuracy

‍

• High speed creasing and folding
• Processes up to 6,000 sheets per hour
• Handles paper up to 400gsm

‍

•    Up to 6,000 sheets per hour

•    Male and female creasing tools

•    Cross perforating tool

•    Side guide system

•    Double feed detection

•    Optional strike perforating tool

‍

• Up to 6,000 sheets per hour
• Up to 20 creases per sheet
• Perforations in both directions
• In-line folding

‍

• Produces up to 200 books per hour
• Up to 360 cycles per hour
• Creates perfect bound, tape bound, and padded books
• Single-operator design and easy changeovers
• Unique notching method for maximum glue penetration
• Improved clamping and nipping system

‍

• Processes up to 50 sheets per minute
• Up to 10 slits, 25 cuts and 20 creases in a single pass
• 5.9" feed capacity
• Standard PC Controller software for easy job setup and unlimited job storage
• Built-in CCD scanner reads barcodes and registration marks
• External waste bin
• Optional rotary tool and cross perforating modules
• Add the Integrated Folding System for in-line folding  

‍

• Can be used with the DSC-10/60i and DSC-10/20 Collator
• Ideal for cross or straight stacking jobs
• Processes up to 4,000 sets per hour

‍

• Compact footprint fits into limited spaces
• Inkjet technology and UV lamp for instant curing
• Easy pre-press preparation and operation
• Accurate camera image registration
• Air suction feed system
• Fast-tracked delivery and installation

‍

• Three-roller friction feed system
• Miss-feed, paper jam, and optical double feed detections ensure document integrity
• Standard cross folding unit for right angle folds
• Six pre-programmed standard folds
• High speed folding up to 242 sheets per minute
• 20 job memories for custom folds
• Automatic paper size detection
• Automatic fold plate setting
• Built-in sound absorbers for quiet operation
• 500-sheet feed tray capacity

‍

• Air suction feed system ideal for digital print documents
• Miss-feed, paper jam, and optical double feed detections ensure document integrity
• Six pre-programmed fold styles
• High speed folding up to 260 sheets per minute
• 20 job memories for custom folds
• Automatic paper size detection
• Automatic fold plate setting
• Sound absorbers for quiet operation
• 625-sheet feed tray capacity
• Optional Side Air Kit for large paper sizes

‍

• Folds up to 135 sheets per minute
• 500-sheet feed capacity
• Automatic setting of fold plate and ejection roller
• Six pre-programmed popular folds
• Cross folding feature for right-angle folds
• Electronic fold plate adjustment for custom folds
• Test button folds two sheets for inspection

‍

• Folds up to 241 sheets per minute
• 500-sheet feed capacity
• Performs six of the most common folds and custom folds
• Cross folding feature for right angle folds
• Ascending and descending count
• Test button folds two sheets for inspection
• Interval/batch modes
• Compact, reliable and energy saving

‍

• Three-roller friction feed system
• Six pre-programmed standard folds
• Standard cross folding unit for right angle folds
• High speed folding up to 242 sheets per minute
• 10 job memories for custom folds
• Built-in sound absorbers for quiet operation
• 500-sheet feed tray capacity

• Up to 7,200 sets per hour LTR LEF Straight Stacking
• Collating modes (normal, interleave, block and alternative)
• Two sheet counting modes
• User friendly LCD control panel

‍

• Small footprint
• Trims the head and foot at up to 4,500 booklets per hour
• Optional gutter cutter processes 2-up applications up to 9,000 booklets per hour
• Configurable with the iSaddle System and most DBM-600 Bookletmaker configurations

‍

• Designed for short to medium runs, and variable data productions
• PUR binding for digital and coated stocks
• Quick and easy setup and changeover
• Single-clamp, fully automated
• Automatic book thickness detection for side glue & cover scoring

‍

• Designed for short to medium runs, and variable data productions
• Quick and easy setup and changeover
• Single-clamp, fully automated
• Automatic book thickness detection for side glue and cover scoring

‍

• Individual air separation and suction adjustments
• Unique belt suction feed system
• Feeds both offset and digital print applications
• Configurable with the DSC-10/20 Stacker or DCR-ST Cross Stacker for collating and stacking

‍

• Individual air separation and suction adjustments
• Unique belt air suction feed system
• Feeds both offset and digital print applications
• Collates up to 10,000 sets per hour

‍

• Produces up to 4,500 booklets when connected to the DBM-600/T Bookletmaker and Trimmer or iSaddle
• User-friendly PC Controller software
• 24" loading capacity
• Feeds up to 14" x 24" paper using the optional DSF-CFL Cover Feeder
• Optional Barcode Kit ensures complete set integrity using 1D or 2D barcodes
• Adapters are available to adapt the DSF-6000 paper cart to the HP Indigo 5500/7000 or Xerox iGen 3/4
• Produces full-bleed booklets with the optional DKT-200 Two Knife Trimmer or SCC Slit/Cut/Crease module

‍

• Adds a square spine finish for a flatter look
• Ideal for low to mid-volume runs
• Processes up to 2,600 booklets per hour
• Finishes booklets up to 0.17"/4.2 mm thick
• Can be used stand-alone to hand feed
• Can be configured with the DBM-350/T Bookletmaker
• Can be configured with the DBMS/T Saddle Stitcher in off-line mode (stand is required)

• Bursts, trims, decollates, and slits continuous forms
• Variable speed up to 410 feet per minute
• Jam detector
• Interlocking safety cover
• Last form sensor
• Dynamic Stability Control

‍

• All-in-one slit/cut/crease/fold finishing solution
• Integrates with the DC-746/646/446 models
• Multiple-up processing
• Increased stacking capacity
• Folds sheets up to 350gsm

‍

• Ideal for rounding corners of covers, business cards, postcards, greeting cards, and photos
• Easy operation via foot pedal or manual switch
• 2 interchangeable dies (optional)
• Cuts up to a 2.75" (70 mm) stack
• Patented upper die design and micro-adjustable lower die allow for smooth and accurate cuts
• Specially designed to cut through multiple sheets at a time with the least amount of effort
• Interchangeable die system allows various jobs to be performed

‍

• Rotary magnetic cylinder die cutter
• Designed for use with flexible dies
• Fast die changeover
• Minimal set up times
• 6,000 cycles per hour
• Processes 14" x 20" sheets at 3,000 sheets per hour
• Optional separator/conveyor unit with photo eye sensor

‍

• Hand feed tray
• Rotary magnetic cylinder die cutter
• Designed for use with flexible dies
• Fast die changeover
• Minimal set up times
• Processes 14" x 20" sheets
• Optional separator/conveyor unit available

‍

• Unique vibration system for efficient paper jogging, edge aligning and drying
• Ionized, air-assisted blowing effective for the reduction of static electricity
• Small footprint for easy portability

‍

• Adds gloss or satin coating
• Handles both offset and digital print applications
• Coats both sides of the sheet smear-free
• Accommodates 13" paper widths
• Infrared heater helps coat difficult stock with smooth and accurate finishes
• Hand-free tray
• Comes standard with the high capacity SF-200 Air Suction Feeder

‍

• Adds gloss, matte or satin coating
• Handles both offset and digital print applications
• Coats both sides of the sheet smear-free
• Accommodates 21" x 30" sheet sizes
• Standard SF-300 Suction Feeder for high volume jobs
• IR heating system and automatic cleaning system
• UL and CE certified
• Optional High Pile Feeder and Stacker available

‍

• High speeds up to 148 feet (45 meters) per minute
• Adds gloss, matte, or satin coating
• Intelligent Control System for easy operation
• Auto Gap prevents excess coating from smearing to the backside of the print
• Infrared Heating System helps cure difficult stock
• Heated rollers lower UV varnish viscosity for a more consistent and smooth finish
• Standard bridge unit can be connected to any digital press to feed sheets directly
• Full in-line integration with HP Indigo 7x00 Digital Presses
• UL and CE certified
• High Pile Feeder and Stacker option is available

• Ideal for mid to high volume printers
• Accepts output from multiple printers
• Heavy-duty saddle stitcher produces thicker, flatter booklets
• Converts pre-collated sets into finished booklets
• Feeds larger sheet sizes up to 9.05" x 24"
• Belt suction feeding with front and side air separation
• Built-in ultrasonic double feed detection and an anti-static device
• Optional three-knife trimming capabilities and 2-up processing

‍

• High volume sheet feeding and bookletmaking
• Feeds up to 600 sheets per minute
• 24" high capacity stacker
• User-friendly PC Controller software
• Feeds up to 14" x 24" paper using the optional DSF-CFL Cover Feeder
• Optional Barcode Kit ensures complete set integrity using 1D or 2D barcodes
• Adapters are available to adapt the DSF-6000 paper cart to the HP Indigo 5500/7000 or Xerox iGen 3/4
• Optional DKT-200 Two-Knife Trimmer can be added to produce full-bleed booklets

‍

• Heavy-duty sheet feeding and collating saddle stitching system
• Ideal for mid to high volume jobs
• Produces thicker, flatter books
• Optional PC Controller for easy set up
• Optional three-knife trimming capabilities and 2-up processing with the DKT-200 Two-Knife Trimmer

‍

• Heavy-duty saddle stitcher produces thicker, flatter books
• First in its class to create letter landscape booklets
• Handles sheets up to 14" wide and 24" long
• 60-second changeovers with PC Controller
• Standard Intelligent Multi-bin Feeding (IMBF) for custom feed jobs
• Optional three-knife trimming capabilities - processes 2-up applications up to 9,000 books an hour

‍